Exitor Conveyor Rollers
|
Three Roll Trough 20 – 45 degrees Range, most commonly used configuration for Carry Idler Sets Offset used to assist belt tracking for mainly light and medium duty, up to 1200mm belt.Inline  |
Three Roll Weigh Idlers 20 – 45 degrees Range Used on weigh machines or load cells, lead in and lead out sets (which have machined and balanced rollers to ensure zero vibration) and jacking screws or cams to ensure consistent sectional profile and alignment so calibration is not affected.  |
Installed at the loading point to absorb the shocks and to help protect against belt damage. Retractable sets are also used in the skirt area, allowing the rollers to be changed out without disturbing the skirting.  |
|
Three Roll Suspended Trough and Impact idlers – 20 – 45 degrees Range Due to the swing nature this absorbs high impact and less dynamic loads on the rollers.Used in demountable mine structures such as gate conveyors as it is easy to change out and re install.  |
Three Roll Adjustable transition idlers, usually in increments to a maximum range of 15 degrees Used at head and tail position to support the belt as it goes from the trough to the flat position.  |
Three Roll Trough Picking idlers, usually 20 degrees Has a long centre roller and short wing roller, used in waste recycling plants to manually separate materials and also belt feeder applications.  |
|
Single or Vee Roll Rubber disc return idlers, usually 10 – 20 degrees Used in wet, sticky or abrasive conditions. Helps belt tracking due to less build up.  |
Trough Training Idlers, anti-friction or poly pad swivel top frame, activated by servo rollers Used to train the belt approaching the head end of the conveyor.  |
Return Training idlers, anti-friction or poly pad swivel top frame, activated by servo rollers Used to train the belt approaching the tail end of the conveyor.  |
|
Trough and return side guides Prevents the belt hitting and wearing out the structure. Can be used for tracking but it is not advised due to belt damage.  |
Single Roll Flat Impact Carry idlers Used in the skirt area under bins and feeders loading area.  |